USB devices


Posted On
Posted By admin

The Big X button is tied to the Brake effect. This is a hardware control, and changes will not be reflected in the Mixxx UI 15 Shift Alters the behavior of certain controls. In Toggle mode, the button will toggle between lit and unlit with each beat. Holding shift while pressing either button will align the beatgrid to the current position. At thirty seconds from the end of the track, the progress meter will flash to indicate that the end of the track is approaching. The first three knobs will control the first three parameters for that effect. Except where otherwise noted, content on this wiki is licensed under the following license:

Uploader: Takinos
Date Added: 19 February 2018
File Size: 58.64 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 14299
Price: Free* [*Free Regsitration Required]

This is expected to change in 2. Selects which track s are heard through the headphone output This mapping has two PFL modes.

M Audio Torq

Translations of this page: The latest version can be found in this Forum Post. This setting can be toggled by holding both shift buttons and pressing any PFL button.

The left-hand side controls the samplers, with the knobs controlling the volume, and the buttons firing off the samples. All are soft-takeover enabled.


Controls the volume of the booth audio output. These will be mentioned in-line. Once an effect has the focus, pressing the xpponent again will toggle it on and off.

Holding shift while pressing a hotcue button clears that hotcue. Controls the volume of the master audio output. Lights No need to hold down any keys, but see the note for M-audjo users above.

Due to limitations in the 2. The Gain kill Gwill momentarily silence the track entirely. This documentation should be considered preliminary and subject xponenf change.

Any additional effect parameters beyond three will have to be controlled from the Mixx UI. When the button is lit, scratch mode m-sudio enabled. Controls the headphone mix. The top knob controls the gain xponeng that deck, while the lower three control the High, Mid, and Low EQ channels. The Midi mode see 19 is not mapped at this time. The right-hand side controls effects.

The 1, 2, 4, and 8 buttons behave as normal, starting a loop of X beats at the current position. The knobs m-audoo control the parameters of the effect that currently has the focus. If the buttons no longer pulse brightly and fade down when you press them, then the Xponent is in the correct mode for use with Mixxx.

Holding both shift buttons while pressing either Sync button will cycle through the available modes at runtime. M-Audio discontinued its DJ products after the company was bought by inMusic in All the way to the right sends only the main output to the headphones.


Documentation for the mapping is available on the Mixco website. All the way to the left sends only the track s selected by the PFL buttons see 12 to the headphones.

M Audio Torq | eBay

Acts as a mouse input to the computer. Flashes on each beat of the corresponding track. Connector 2 is the main out, and Connector 1 is the headphones. The default mode can be changed in the config section of the M-Audio-Xponent-Advanced-scripts.

This is a hardware control, and changes will not be reflected in the Mixxx UI 14 Booth Output Volume Controls the volume of the booth audio output.

The script was written with m-auvio Mixco mapping framework. This is a hardware control, and changes will not be reflected in the Mixxx UI.